• 142R

    142R is the next generation of high-efficiency, fractional-horsepower outdoor motors. 142R is ideally suited to outdoor applications such as split system outdoor units, package units, or any other prop fan air-moving that requires a 1/5, 1/3, 1/2 or 3/4 horsepower, 300-1200 RPM motor.


    Evergreen CM

    The Evergreen CM, or commercial building series VAV box replacement motor, can be integrated into a low voltage system controller to change speeds if needed for low or high occupancy and building non-occupancy set back.


    Evergreen PF

    The Evergreen PF is a drop-in replacement for original pedestal fan motors, and is a cost-effective solution to replacing an entire fan assembly.


    General Purpose AC and DC Capacitors

    This capacitor series is designed specifically for applications such as AC filters where harmonic frequencies greater than 60Hz are common. Application Data is provided in the catalog, which gives the Equivalent Series Resistance (ESR) for these units. This allows the user to calculate the losses for each design/application and to ensure that they are kept within the permissible limits.


    HID Lighting Dry Capacitors

    This capacitor series is designed specifically for the HID Lighting applications where the capacitor are used as part of the ballast circuit for mercury vapor, metal halide, and high-pressure sodium lamps. The units are designed to operate at up to 90ºC, which is the normal requirement for HID ballast capacitors. Due to advances in material technology and breakthroughs in proprietary capacitor manufacturing processes, selected ratings are now available for operation up to 100ºC for 60,000 hours.


    Life-Line Capacitor Kit

    The Life-Line Capacitor Kit is the all in one replacement kit for your single and dual run capacitor needs. In addition to many single capacitor ratings, this kit has been designed to cover 48 of the most common dual rating in both in 370VAC and 440VAC applications.


    Motor Run AC Application Capacitors

    This capacitor series is designed specifically for the motor run applications where the capacitors are use in conjunction with permanent split capacitor type motors. They may be used on either 50 or 60-Hertz systems but should not be used at higher frequencies or in applications where higher frequency harmonic are present. For those types of applications the General Purpose AC Capacitors should be used.


    Motor Run Dry AC Capacitors

    This capacitor series is designed and manufactured with metallized polypropylene film to provide self-healing properties and very low dielectric losses. These features, coupled with a flame retardant plastic case and encapsulate, make these capacitors ideally suited for permanent split phase motor applications as well as other applications where the user has determined that a dry metallized film capacitor with no internal protective device is suitable and acceptable.


    Motor Start AC Capacitors

    This capacitor series is designed specifically for the motor start applications where the single-phase AC motor provided with a centrifugal switch, or other device which cuts the capacitor out of the circuit once the full speed is reached. They may be used on either 50 or 60-Hertz systems but should not be used at higher frequencies or in applications where higher frequencies are present.


    Screw Terminal Electrolytic Capacitors

    This capacitor series type has high gain aluminum foil, better heat dissipation, and extended life characteristics. Electrolytic capacitors also offer more capacitance and ripple current capabilities. These capacitors are used in different applications such as welding equipment, Uninterrupted Power Supplies (UPS) systems, Light Train with patented construction for high vibration, etc.


    Snap-In Electrolytic Capacitors

    This capacitor series type has high gain aluminum foil, better heat dissipation, and extended life characteristics. Electrolytic capacitors also offer more capacitance and ripple current capabilities. These capacitors are used in different applications such as welding equipment, Uninterrupted Power Supplies (UPS) systems, Light Train with patented construction for high vibration, etc.